Welding and NDT Inspector M/F

  • Assystem Energy & Infrastructure
  • France
  • juil. 09, 2020
Contrat CDI

Description

Job Description: Welding & NDT Inspector is in charge of performing predefined checks regarding the conformity of welding works and non-destructive testing concerning essentially concrete reinforcements, embedded items, steel liners, etc. during the construction phase, and steel supports, pipelines, equipment fixing, etc. during the installation phase. Responsibilities: • Ensure that the welding and NDT works inspected are compliant with regulatory and technical requirements according to the Turkish law 30024 • Ensure the traceability of the inspections performed, of the defaults and deviations observed and of the non-conformities issued • Verify the defaults, deviations or non-conformities are properly corrected • Ensure his/her inspection activities are performed in a safely manner Duties: • Take knowledge of Akkuyu NPP Project referential (norms and standards, specifications, procedures, etc.) related to the welding and NDT works to be inspected  • Review and comment the execution documentation (technical drawings, quality plans …) related to the works to be inspected  • Prepare the inspection on site by identifying the elementary checks to be carried out, considering the requirements defined by the Turkish law 30024  • Conduct the inspection on site in order to verify the compliance of the mechanical and welding works executed with the execution documentation and applicable norms and standards  • Monitor non-destructive tests performed in accordance with approved procedures with the following methods: visual testing (VT), dye penetrant testing (PT), magneticparticle testing (MT), ultrasonic testing (UT) and radiographic testing (RT)  • Elaborate the Work Inspection Report in order to keep record of the content and the results of the inspection performed on site  • Describe and record the defaults or deviations observed during the inspection and follow-up their resolution   • Perform an assessment on the defaults and deviations recorded, and when decided, describe and write a non-conformity notification, then monitor the corresponding corrective and preventive actions  • Launch when necessary independent tests on samples (i.e. welded elements), to be performed by accredited laboratories and follow up the results • Respect the existing AEOS NCIO project Quality Assurance processes and HSE requirements   • Contribute to the elaboration of the AEOS NCIO Project Monthly Report, by providing information on inspection activities carried out during the month  • Attend, on request, internal or external technical meetings Interfaces: • Belong to the AEOS NCIO Inspection Team  • Report to the Mechanical & Welding Lead Inspector and follow his/her instruction  • Notify the Mechanical & Welding Lead Inspector of non-conformities and follow up on resolution of non-conformance reports  • Interface with the AEOS NCIO Project Support Team, on documentation management topics and for the elaboration of the Monthly Report  • Respect the instructions given by the QHSE team regarding Quality Assurance and HSE requirements  • Communicate and exchange on a daily basis with all the stakeholders involved in the mechanical and welding works Knowledge:  • Good knowledge of the following standards:  o ISO 9001 o ISO 3834  o Russian PNAE 10-031-92  o Russian PNAE 10-032-92  o Russian PNAE G-7-008-89  o Russian PNAE G-7-009-89  o Russian PNAE G-7-010-89  o Russian GOST 23118-99  o Russian SP 53-101-98  o Russian SNiP 3.03.01-87  o Russian GOST 7512-82  o Russian GOST 14782-86  o Russian GOST 21105-87  o Russian GOST 18442-80  o ISO 17660 (will be a plus)  o GOST 5264-80 (will be a plus)  o GOST 14771-76 (will be a plus)  o SP 70.13330-2012 (will be a plus)  • Fluent in Turkish – read and spoken  • Fluent in English – read, spoken and written  • Fluent in Russian – read, spoken (will be a plus)  • Microsoft Office software (professional use) Skills: • Ability to quickly understand technical requirements (e.g. specifications, drawings, codes, norms)  • Ability to write technical documents and reports   • Good written and verbal communication skills  • Ability to communicate proactively in a multicultural environment  • Ability to meticulously observe in order to detect non-compliances Behaviour:  • Ability to quickly understand technical requirements (e.g. specifications, drawings, codes, norms)  • Ability to write technical documents and reports   • Good written and verbal communication skills  • Ability to communicate proactively in a multicultural environment  • Ability to meticulously observe in order to detect non-compliances Education: • Undergraduate diploma in mechanical field (High school + 4 years)  • Specialization in welding & NDT Experience: • 10 years in inspection and/or in quality assurance/quality control in welding and NDT engineering  • 15 years minimum of professional experience in mechanical and welding engineering  • Experience in construction or industrial projects  • Experience in a Russian construction project Qalification: • CSWIP 3.1 welding inspector certification  • Certification in NDT such as GOST R50.05.08-2018, R50.05.07-2018, R50.05.052018, R50.05.09-2018, R50.05.01-2018  • Time-of-flight diffraction TOFD and Phased Array ultrasonic testing PAUT certification (will be a plus)  • ISO 9001 certificate (will be a plus) Specific requirements: • Driving license mandatory  • Military service completed  • Flexibility in working time due to construction site neC

Description entité

Depuis 50 ans, nous sommes animés par la conviction que les ingénieurs, par leur audace, leur expertise et leur capacité à faire bouger les lignes sont les architectes du monde de demain. Tous les jours, nos 5 700 collaborateurs innovent au contact de leurs clients. Ils accompagnent les plus grands projets de l'ingénierie mondiale dans les domaines de l'énergie, de la santé, des sciences de la vie et des transports. Groupe international en forte croissance, nous sommes présents dans 14 pays (Europe, Moyen-Orient, Asie, Afrique).

Entité

Assystem Ankara

Mission

Job Description: Welding & NDT Inspector is in charge of performing predefined checks regarding the conformity of welding works and non-destructive testing concerning essentially concrete reinforcements, embedded items, steel liners, etc. during the construction phase, and steel supports, pipelines, equipment fixing, etc. during the installation phase. Responsibilities: • Ensure that the welding and NDT works inspected are compliant with regulatory and technical requirements according to the Turkish law 30024 • Ensure the traceability of the inspections performed, of the defaults and deviations observed and of the non-conformities issued • Verify the defaults, deviations or non-conformities are properly corrected • Ensure his/her inspection activities are performed in a safely manner Duties: • Take knowledge of Akkuyu NPP Project referential (norms and standards, specifications, procedures, etc.) related to the welding and NDT works to be inspected  • Review and comment the execution documentation (technical drawings, quality plans …) related to the works to be inspected  • Prepare the inspection on site by identifying the elementary checks to be carried out, considering the requirements defined by the Turkish law 30024  • Conduct the inspection on site in order to verify the compliance of the mechanical and welding works executed with the execution documentation and applicable norms and standards  • Monitor non-destructive tests performed in accordance with approved procedures with the following methods: visual testing (VT), dye penetrant testing (PT), magneticparticle testing (MT), ultrasonic testing (UT) and radiographic testing (RT)  • Elaborate the Work Inspection Report in order to keep record of the content and the results of the inspection performed on site  • Describe and record the defaults or deviations observed during the inspection and follow-up their resolution   • Perform an assessment on the defaults and deviations recorded, and when decided, describe and write a non-conformity notification, then monitor the corresponding corrective and preventive actions  • Launch when necessary independent tests on samples (i.e. welded elements), to be performed by accredited laboratories and follow up the results • Respect the existing AEOS NCIO project Quality Assurance processes and HSE requirements   • Contribute to the elaboration of the AEOS NCIO Project Monthly Report, by providing information on inspection activities carried out during the month  • Attend, on request, internal or external technical meetings

Profil

Interfaces: • Belong to the AEOS NCIO Inspection Team  • Report to the Mechanical & Welding Lead Inspector and follow his/her instruction  • Notify the Mechanical & Welding Lead Inspector of non-conformities and follow up on resolution of non-conformance reports  • Interface with the AEOS NCIO Project Support Team, on documentation management topics and for the elaboration of the Monthly Report  • Respect the instructions given by the QHSE team regarding Quality Assurance and HSE requirements  • Communicate and exchange on a daily basis with all the stakeholders involved in the mechanical and welding works Knowledge:  • Good knowledge of the following standards:  o ISO 9001 o ISO 3834  o Russian PNAE 10-031-92  o Russian PNAE 10-032-92  o Russian PNAE G-7-008-89  o Russian PNAE G-7-009-89  o Russian PNAE G-7-010-89  o Russian GOST 23118-99  o Russian SP 53-101-98  o Russian SNiP 3.03.01-87  o Russian GOST 7512-82  o Russian GOST 14782-86  o Russian GOST 21105-87  o Russian GOST 18442-80  o ISO 17660 (will be a plus)  o GOST 5264-80 (will be a plus)  o GOST 14771-76 (will be a plus)  o SP 70.13330-2012 (will be a plus)  • Fluent in Turkish – read and spoken  • Fluent in English – read, spoken and written  • Fluent in Russian – read, spoken (will be a plus)  • Microsoft Office software (professional use) Skills: • Ability to quickly understand technical requirements (e.g. specifications, drawings, codes, norms)  • Ability to write technical documents and reports   • Good written and verbal communication skills  • Ability to communicate proactively in a multicultural environment  • Ability to meticulously observe in order to detect non-compliances Behaviour:  • Ability to quickly understand technical requirements (e.g. specifications, drawings, codes, norms)  • Ability to write technical documents and reports   • Good written and verbal communication skills  • Ability to communicate proactively in a multicultural environment  • Ability to meticulously observe in order to detect non-compliances Education: • Undergraduate diploma in mechanical field (High school + 4 years)  • Specialization in welding & NDT Experience: • 10 years in inspection and/or in quality assurance/quality control in welding and NDT engineering  • 15 years minimum of professional experience in mechanical and welding engineering  • Experience in construction or industrial projects  • Experience in a Russian construction project Qalification: • CSWIP 3.1 welding inspector certification  • Certification in NDT such as GOST R50.05.08-2018, R50.05.07-2018, R50.05.052018, R50.05.09-2018, R50.05.01-2018  • Time-of-flight diffraction TOFD and Phased Array ultrasonic testing PAUT certification (will be a plus)  • ISO 9001 certificate (will be a plus) Specific requirements: • Driving license mandatory  • Military service completed  • Flexibility in working time due to construction site neC

Métier

Expertise Métier

Date de publication

juil. 09, 2020

Secteur

Nucléaire